Payment & Shipping Terms:
|Material:||Galvanized Steel, Cold Rolled Steel, Stainless Steel, PP||Size:||3600*1500*850mm, Customized|
|Color:||Grey, White, Blue Or Mixed, Customized||Warranty:||12 Months|
All Steel Laboratory Island Bench 3600*1500*850mm
Laboratory bench is one of the basic equipment of laboratories in various industries,
With reasonable structure, good load-bearing, flexible to assemble, easy to maintain and convenient to install and transport, it is the best choice for middle level and high level laboratories.
XUECHENGLab Furniture is one new environmental protection product, non-toxic, odorless and pollution-free, ensuring the safety and health of laboratory operators.
Workop: use 12.7mm thick phenolic resin(solid core physiochemical)board, all surrounding edges are double-thickened to 25.4mm, anti-static, waterproof, easy to clean, strong load-bearing, chemical (90% strong acid and alkali)corrosion resistance, high temperature resistance of 180 ℃, good scratch resistance, beautiful and smooth without hurting hands.
epoxy resin board, ceramic board, stainless steel sheet or marble is optional.
Cabinet Body: use fixed type box cabinet to support the worktop directly.
Door, Drawer, Baffle(removable panels) and the whole cabinet body is made of 1.0-1.2mm thick cold-roll steel or galvanized steel sheet, with surface treated by pickling and phosphating, and electrostatic coated by epoxy resin powder, acid and alkali resistance, corrosion resistance, with stable structure and strong bearing capacity.
Optional: the knee space(leg room) design for people to sit.
- Slide Rail: use 3- section rolling ball slide rail, light smooth and no noise when slide, high strength and not deformed after long term load, can be used normally more than 1000,000 times.
- Hinge: use damping hinge, with opening angle is 90° or 110°, and it can be closed automatically without noise, no spring back, high strength and can not be easily broken, open-close can reach 100,000 times at least.
-Handle: generally use bent integrative handle, strong solid and elegant appearance.
embedded alum-alloy handle, bow type alum-alloy handle or stainless steel handle is available.
1. The dimension above is standard.
2. We can design and manufacture non-standard dimension as per users' requirements.
3. The price excluding reagent rack, drip rack, water sink&tap, eyewasher, etc
· Water Sink/Test Flume
Material: high density PP made, resistant to most chemicals, strong corrosion resistance;
Wall thickness: 5mm, up to 7mm, flat and non-deformation.
· Water Tap/Faucet /Test Nozzle
Material: thickened solid brass Surface Treatment: coated by high gloss epoxy resin powder; resistant to most chemicals, corrosive and heat resistance, anti ultraviolet radiation, non-toxics and safety.
Ceramic Valve Headwork: sealed structure, can be 90° roated, with lifetime 500, 000 times without any leakage; the suitable inlet water pressure is 0.9-1.2Mpa.
Switch Knob: high grade PP made, ergonomic design, convenient and quick. feel comfortable, easy to operate. Nozzle: detachable, anti-splash bubbler is optional;
goose neck pipe can be 360° rotated.
· Pegboard/Drip Rack/ Drying Rack
Material: high grade PP, stainless steel is available.
Size: 400*550*110mm, 550*700*120mm
Type: single faced or double faced, there are drain holes in the middle of the bottom tray, and the pegs(drip rods) can be detachable, easy to use.
Installation mode: wall mounted/ desk mounted
· Two/Three-layer Reagent Rack:
Reagent rack column: use high quality steel sections welding molding, spec is 50*100, surface is coated with epoxy resin powder, firm structure, anti-corrosion and elegant appearance; there is 1 socket per column. Reagent rack shelf: use 5-10mm thick single side frosting high quality tempered glass.
all around rim treatment, smooth and not easy to hurt the hands.
Equipped with glass support arm, which make user freely adjust the height according to comfortable requests.
The shelf edge is equipped with Ø12mm stainless steel stop rods in order to prevent reagent utensil drop, elegant appearance and useful.
· Trunking/Socket Box
Steel, Alum-alloy or PP pedestal box
10A or 16A socket, water-proof (3-hole or 5-hole) socket is optional
All international socket standards are available like British Standard, American Standard. etc
They would be packed in cartons (FCL shipping) or plywood boxes(LCL shipping) in assembled or disassembled state.
biological pharmacy, biological analysis, plant culture, environmental test, electronic instruments and scientific research, etc.
Xuecheng Global Trader Co., Ltd is one professional industry and trade company for lab furniture and lab water purification system, integrating production, R&D, sales, installation and after-sale service, located in beautiful Olympic Sailing City- Qingdao, China.
After years' development, we have grown into one diversified company, engaged in all kinds of lab furniture, school furniture, lab equipment, medical equipment, etc
Workshop& Production Line