Factory Direct Selling Side Lab Table 7200mm Long All Steel Laboratory Wall Bench

Side Laboratory Table All Steel Lab Wall Bench 7200x750x850mm
 

Description

Laboratory bench is one of the basic equipment of laboratories in various industries,

With reasonable structure, good load-bearing, flexible to assemble, easy to maintain and convenient to install and transport, it is the best choice for middle level and high level laboratories.

XUECHENGLab Furniture is one new environmental protection product, non-toxic, odorless and pollution-free, ensuring the safety and health of laboratory operators.

Features

Countertop: use 12.7mm thick phenolic resin(solid core physiochemical)board, all surrounding edges are double-thickened into 25.4mm, anti-static, waterproof, easy to clean, strong load-bearing, chemical (90% strong acid and alkali)corrosion resistance, high temperature resistance of 180 ℃, good scratch resistance, beautiful and smooth without hurting hands.

epoxy resin board, ceramic board, stainless steel plate or stone(marble or granite​) is optional.

Base Cabinet: use fixed type cabinet to support the countertop directly.

Door, Drawer, Baffle(removable panels) and the whole cabinet body is made of 1.0mm thick cold-roll steel or galvanized steel plate, with surface treated by pickling and phosphating, and electrostatic coated by epoxy resin powder, acid and alkali resistance, corrosion resistance, with stable structure and strong bearing capacity.

Optional: there is knee space(leg room) design for people to sit.
- Drawer Slide: use 3- section rolling ball slide rail, light smooth and no noise when slide, high strength and not deformed after long term load, can be used normally more than 1000,000 times.
- Door Hinge: use damping hinge, with opening angle is 90°, and it can be closed automatically without noise, no spring back, high strength and can not be easily broken, open-close can reach 100,000 times at least.

- Door Handle: generally use integral molding bent type handle, strong solid and elegant appearance.

recessed type alum-alloy handle, U type alum-alloy handle or U type stainless steel handle is available.

 
Technical Specifications

Notes:
1. The dimension above is standard.
2. We can design and manufacture non-standard dimension as per user'' requirements.
3. The price excluding reagent rack, drip rack, water sink&tap, eyewasher, etc
 

Optional Accessories

· Water Sink/Test Flume

Material: high density PP made, resistant to most chemicals, strong corrosion resistance;

Wall thickness: 5mm, up to 7mm, flat and non-deformation.

· Water Tap/Faucet /Test Nozzle

Material: thickened solid brass Surface Treatment: coated by high gloss epoxy resin powder; resistant to most chemicals, corrosive and heat resistance, anti ultraviolet radiation, non-toxics and safety.

Ceramic Valve Headwork: sealed structure, can be 90° roated, with lifetime 500, 000 times without any leakage; the suitable inlet water pressure is 0.9-1.2Mpa.

Switch Knob: high grade PP made, ergonomic design, convenient and quick. feel comfortable, easy to operate. Nozzle: detachable, anti-splash bubbler is optional;

goose neck pipe can be 360° rotated.

· Pegboard/Drip Rack/ Drying Rack

Material: high grade PP, stainless steel is available.

Size: 400*550*110mm, 550*700*120mm

400*550*260mm, 550*700*280mm
Type: single faced or double faced, there are drain holes in the middle of the bottom tray, and the pegs(drip rods) can be detachable, easy to use.
Installation mode: wall mounted/ desk mounted

· Two/Three-layer Reagent Rack:

1. Vertical Column: use high quality steel sections welding molding, with spec is 50*100*1mm, surface is coated with epoxy resin powder, firm stucture, anti-corrosion and elegant appearance.

2. Socket: 2 sockets per middle column, 1 socket per end column. 1 column per meter generally distributed.

All international socket standards are available, like EU Standard, British Standard, American Standard, Australian Standard, etc

3. Storage Shelf: use 8mm thick single side frosting high quality tempered glass; all around rim treatment, smooth and not easy to hurt the hands.

4. Other Fittings:
Equipped with glass support arm, which make user freely adjust the height according to comfortable requests.
The shelf edge is equipped with Ø12mm stainless steel stop rods in order to prevent reagent utensil drop, elegant appearance and useful.

· Trunking/Socket Box

Steel, Alum-alloy or PP pedestal box

10A or 16A socket, water-proof (3-hole or 5-hole) socket is optional

All international socket standards are available like American Standard, EU Standard, British Standard, Australian Standard, etc

Packaging&Shipping

Description:
We both coperated since 2014, this time LPC(Canada) ordered some customized products in end of Nov, 2017, with benches height 950mm while the fume hoods width 900mm, which is for their own laboratory update.

Company Profile

Xuecheng Global Trader Co., Ltd is one professional industry and trade company for lab furniture, integrating production, R&D, sales, installation and after-sale service, located in beautiful Olympic Sailing City- Qingdao, China.

After years' development, we have grown into one diversified company, engaged in all kinds of lab furniture, lab equipment, medical equipment, etc

Workshop and Production Line

1. Raw materials preparation (kinds of wood/plastic boards, steel plates, etc)
2. Cutting
3. Punching
4. Welding
5. Bending
6. Baking and Painting(semi- product)
7. Assembly
8. Packing
7. Shipping

 

Certification

Customer Visit
Zambia Customer Visit
The Zambia customer only 1 guy, who ordered 13 fume hoods 1600*850*2350mm, and another 40 ones are under discussion, just wait for the goverment prodecure, will be confirmed soon.
We have further discussion for future cooperation like warehouse for our lab furniture, and they company will pay a visit again next year.

Zimbabwe Customer Visit
who ordered six lab fume hoods 1200*850*2350mm (also 2 emergency shower eye washes and 40 water taps)as trial order, they came to check the goods before shipping.
The coming sample order: island bench 3000*1500*850mm and wall bench 1500*750*850mm &wall cabinet 1500*350*600mm intended for their showing room.
And we both hope to extend our products to Zimbabwe and countries nearby, and the sole distribution agreement under discussion.

xuecheng-globe.com
facebook.com/xuechenglab

instagram.com/xuechenglab