Walk-in Type All Steel Laboratory Fume Cupboard 1800*850*2350mm Floor Mounted Fume Hood with CE Certificate

Fume hood is one kind of lab furniture, essential for laboratory, which plays the role of exhaust and ventilation. It is one of the most commonly used local exhaust equipment in the laboratory.

The structure of floor Type fume hood is walk in type, there is an exhaust hole at the top, which can be installed with vent blower.

which is equipped with lining baffles, controller, lamp, sockets, etc.

the visual window adopts tempered glass, drived by sync pulley, can be moved up-down, freely operated by the personnel.

Upper Hood adopts double-layer structure design.

The outer layer and the inner layer are made of 8mm thick high quality pure polypropylene panel, after caved bent treatment into whole cabinet, with strong acid and alkali resistance, corrosion resistance.

- Liner:

The inner side baffles have 2 maintanence windows, can be set with water cock or gas cock, the back baffle can be fixed with guide baffle, the top baffle can be set with lighting and gas collecting device.

1- guide baffle: use bran-new 8.0mm thick welded PP board to make, with strong acid alkali resistance, corrosion resistance,

installed in the back and top of the work space, consists of at least 3 panels, a gas chamber is formed between the connection between the working space and the exhaust pipe to discharge the polluted gases evenly.

the installation size is scientific and reasonable, without airflow dead corner, can get max exhaust gas capture performance.

2-fixture clip: use acid alkali resistant PP material, good anti-corrosion performance, generally azure blue color.

used to combie the guide panel and the hood body, can be disassembled repeatedly.

3- gas collection hood: use acid alkali resistant PP material, with strong corrosion resistance, the bottom inlet is rectangle opening, the top outlet is circular opening, with standard air outlet diameter 250mm, can be customized.

- Sash: Visual Sliding Window System

the suspension device use sync structure

1- sync belt: the synchronous belt drive displacement is accurate,small force on the shaft, compact structure, oil resistance, good wear resistance and good anti-aging performance.

2- sync pulley: polypropylene pulley, mute.

3- Visual window:

1) sliding window:

The movable vertical window sliding door is placed between the working space and the operator to protect the operator's safety, combined with the balance position, the visual window sliding door can stopat any active point;

The field of view can be completely clear and unobstructed.

2) glass:

Use 5mm thick tempered glass, high strength, good bending resistance, and will not produce small fragments with acute angles when broken.

     3) frame: use frameless door, embeddedly combined with the glass’ four edges clamped, and has low frictional resistance to ensure the safety and durability of the visual window.

- Electrical Devices:

1- Controller:

The LCD control panel is set with buttons for power supply, socket, lighting, fan and operating indicator light, etc.

The LCD screen can display the operating condition clearly.

2- Lamp: 1 piece 30W tri-proof LED lamp, waterproof, anti-corrosion, anti-oxidation, quick repair design

3- Socket: use anti-corrosion and anti-splash cover, each fume hood is matched with 4 universal sockets.

can be matched with international standards of sockets in addition as per customer’s actual requirements, like American standard, British standard, European standard, Austrialian standard, etc

4. Circuit Breaker(Optional): overload and short circluit protection, ensure the safety of user.