Payment & Shipping Terms:
|Material:||Galvanized Steel, Cold Rolled Steel, Stainless Steel, PP||Size:||3600*1500*850mm, Customized|
|Color:||Grey, White, Blue Or Mixed, Customized||Warranty:||12 Months|
All Steel Laboratory Island Bench 3600*1500*850mm
Laboratory bench is one of the basic equipment of laboratories in various industries,
With reasonable structure, good load-bearing, flexible to assemble, easy to maintain and convenient to install and transport, it is the best choice for middle level and high level laboratories.
XUECHENGLab Furniture is one new environmental protection product, non-toxic, odorless and pollution-free, ensuring the safety and health of laboratory operators.
Workop: use 12.7mm thick phenolic resin(solid core physiochemical)board, all surrounding edges are double-thickened into 25.4mm, anti-static, waterproof, easy to clean, strong load-bearing, chemical (90% strong acid and alkali)corrosion resistance, high temperature resistance of 180 ℃, good scratch resistance, beautiful and smooth without hurting hands.
Epoxy resin board, ceramic board, stainless steel plate or stone(marble, granite) is optional.
Cabinet Body: use fixed type box cabinet to support the worktop directly.
Door, Drawer, Baffle(removable panels) and the whole cabinet body is made of 1.0-1.2mm thick cold-roll steel or galvanized steel sheet, with surface treated by pickling and phosphating, and electrostatic coated by epoxy resin powder, acid and alkali resistance, corrosion resistance, with stable structure and strong bearing capacity.
Optional: there is knee space(leg room) design for people to sit.
- Drawer Slide: use 3- section rolling ball slide rail, light smooth and no noise when slide, high strength and not deformed after long term load, can be used normally more than 1000,000 times.
- Door Hinge: use damping hinge, with opening angle is 90° or 110°, and it can be closed automatically without noise, no spring back, high strength and can not be easily broken, open-close can reach 100,000 times at least.
- Door Handle: generally use bent Type integral moldinghandle, strong solid and elegant appearance.
recessed type alum-alloy handle, U type alum-alloy handle or stainless steel handle is available.
1. The dimension above is standard.
2. We can design and manufacture non-standard dimension as per user's requirements.
3. The price excluding reagent rack, drip rack, water sink&tap, eyewasher, etc
· Water Sink/Test Flume
Material: high density PP made, resistant to most chemicals, strong corrosion resistance;
Wall thickness: 5mm, up to 7mm, flat and non-deformation.
· Water Tap/Faucet /Test Nozzle
Material: thickened solid brass Surface Treatment: coated by high gloss epoxy resin powder; resistant to most chemicals, corrosive and heat resistance, anti ultraviolet radiation, non-toxics and safety.
Ceramic Valve Headwork: sealed structure, can be 90° roated, with lifetime 500, 000 times without any leakage; the suitable inlet water pressure is 0.9-1.2Mpa.
Switch Knob: high grade PP made, ergonomic design, convenient and quick. feel comfortable, easy to operate. Nozzle: detachable, anti-splash bubbler is optional;
goose neck pipe can be 360° rotated.
· Pegboard/Drip Rack/ Drying Rack
Material: high grade PP, stainless steel is available.
Size: 400*550*110mm, 550*700*120mm
Type: single faced or double faced, there are drain holes in the middle of the bottom tray, and the pegs(drip rods) can be detachable, easy to use.
Installation mode: wall mounted/ desk mounted
· Two/Three-layer Reagent Rack:
1. Vertical Column: use high quality steel sections welding molding, with spec is 50*100*1mm, surface is coated with epoxy resin powder, firm stucture, anti-corrosion and elegant appearance.
2. Socket: multiple international Standards, 2 sockets per middle column, 1 socket per end column.
3. Storage Shelf: use 8mm thick single side frosting high quality tempered glass; all around rim treatment, smooth and not easy to hurt the hands.
4. Other Fittings:
Equipped with glass support arm, which make user freely adjust the height according to comfortable requests.
The shelf edge is equipped with Ø12mm stainless steel stop rods in order to prevent reagent utensil drop, elegant appearance and useful.
· Trunking/Socket Box
Steel, Alum-alloy or PP pedestal box;
10A or 16A socket, water-proof (3-hole or 5-hole) socket is optional.
All international socket standards are available like European Standard, British Standard, American Standard, Australian Standard, etc
- Workshop& Production Line